ShorePort Flexi-Hinge Conversion from Perpendicular (Front) Mount to Parallel (Side) Mount

ShorePort Flexi-Hinge Conversion from Perpendicular (Front) Mount to Parallel (Side) Mount

A set of Front Mount ShorePort Flexi-Hinges (PN 1007015) may be converted into Side Mount (PN 1013365) hinges for Parallel applications. 

You will need to convert 1 (one) of the 2 (two) Front hinges into a Rear hinge.

To do so, 

      -Remove the 13 7/8" Poly Composite Rod, (PN 1004512) and the Weldment (Part Number 1003814.) 

      -Replace with with the Side Mount Weldment, (PN 1013367,)  and the 5.875" Poly Composite Rod, (PN 1001098.) 



To convert ShorePort Flexi-Hinges from Parallel (Side) Mount to Perpendicular (Front) Mount, click here.

    • Related Articles

    • ShorePort Flexi-Hinge Conversion from Parallel (Side) Mount to Perpendicular (Front) Mount

      A set of Side Mount ShorePort Flexi-Hinges, (PN 1013365,) may be converted into Front Mount, (PN 1007015,) hinges for Perpendicular application.  You will need to convert the Rear hinge into a Front hinge. To do so:        -Remove the 5.875" Poly ...

    • ShorePort/PolyDock Section Troubleshooting

      The ShorePort supports up to 1150lb and is 58" W and 138" L. If the fueled up PWC falls within those specs, the ShorePort fails to stay afloat, it may taking on water. If the PWC is over 1150lbs, you may add supplemental flotation up to 1450lbs. Each ...

    • Raising ShorePort Keel Rollers

      ShorePort Keel Rollers may be adjusted to fit the customer's specific PWC model.  When additional lift is needed, you may add Spacer Plates that raise the keel roller an additional 1/2".  Part Number 1003475 Keel Roller Spacer Plate Assembly (each) ...

    • Sidewinder Replacement Parts

      ShoreMaster no longer offers the Sidewinder Motor Unit, its Remote Controllers/Keys or its service parts; nor, do we know of a universal remote that is compatible with these units. If you are unable to use your Sidewinder Motors due to faulty or ...

    • ShorePort Keel Roller Assembly Installation Hardware

      The following PNs are required, (but not included,) per keel roller assembly installation: