Anti-seize grease for pulleys/bushings
The attached photos are of the grease we use when we assemble the pulleys into the rack beams.
This should be used when replacing pulleys/bushings ore performing maintenance on them.
Related Articles
Pulley Lubrication Instructions
Before doing any work on the lift make sure the boat is off the lift and the rack is secured by placing blocking under the rack or use straps to hold it up. --> Remove the pulley by taking out the bolt in the center of the pulley and removing the ...
Lift Winch Position and Placement
On Cantilever Lift models, the motor must be positioned so that the winch faces forward. If motor placement needs to be moved to the opposite side of the lift, you may re-position by removing the winch and mounting it to the upright on the other side ...
Comparing Infinity Boat Lift Models
Vertical Lifts Pontoon Lifts Hydraulic Lifts PWC Lifts ShorePort Frame Construction Welded Aluminum Welded Aluminum Welded Aluminum Welded Aluminum Rotomolded Plastic Lifting Style Vertical Vertical Cantilever Vertical and Cantilever Drive-On Rack ...
Troubleshooting the Lift Brake
If the break is not engaging, the first thing you want to make sure is that the wheel/motor is turning clockwise as it's going up. If it isn't then the cable has been wound up backwards and the brake will never engage. The fix is to lower the lift ...